 |
kitfondle.co.uk
|
Backplate and harness accessories
UK postage and packing is charged at cost or feel free to collect from
Nottingham- M1 J26
and you can have a cup o' tea and your delivery cost back.
Narked at 60 backplate tail
£43.50 + UK P&P (£3.50)
This tail has 2 side pockets useful for storage of spare mask, DSMB,
goody bag etc. 12 brass eyelets for securing deco boys and lifting
bags etc. Two side pockets are approx 11 x 9 inch and have toggles
on the
zips for ease of opening when wearing gloves. Manufactured from heavy duty
textured nylon and sewn with a nylon thread.
Narked at 60 backplate pouch
£39.50 + UK P&P (£4.00)
This pouch pads the backplate for comfort and secures
an emergency SMB or lifting bag. Comes with plastic backplate clips.
It pads the back plate and not only provides comfort on the divers back,
but also secures an emergency SMB or lifting bag. Can be accessed by
the top by a buddy by pulling the webbed tab or by the diver themselves
by
the bottom of the pouch. It has four brass
eyelets and comes with plastic clips and can be fitted to the back
plate in less then a minute. Manufactured out of heavy-duty textured
nylon and sewn with a nylon thread. Please note that the pouch will fit
mk2 plates but for the original WozPlate or a Combro plate you will
need to drill an additional 2 holes on the shoulder part of the plate-
email me for exact details.
Narked at 60 side pockets
£43.50 + UK P&P (£4.00) per pair
Pockets to be attached to the side of the back plate for easy
storage and accessibility of lift bags SMB's etc.
Each side pocket is 11 1/2 inch long and 3 inch wide.
These pockets are ideal for divers that can’t reach around to get
to a back plate tail. Comes with a webbed handle which has a stainless
steel secure press stud fastening and two toggles for ease of opening
when
gloves are worn.
Cordura pouch with a polyproprelene webbed handle. Please note that the
pockets will fit mk2 plates but for the original WozPlate or a Combro
plate you will
need to drill an additional 2 holes on the shoulder part of the plate-
email me for exact details.
Narked at 60 tool pouch
£43.50 + UK P&P (£4.00)
The pouch comes with heavy duty stainless steel trauma shears attached with
a large easily accessible handle. Fitted with a 1 inch webbing securing strap
and stainless steel press stud, and D-ring for easy opening.
The pouch also has a velcro removable separator. Comes with
a 2" webbed handle which has been designed for ease of opening
with thick gloves on. The size of the pouch is 9x9 inch in size and
has a velcro fastening. Manufactured from heavy duty textured nylon and
sewn with a nylon thread.
Webbing
Just a helpful hint to home fondlers- polyprop webbing is the stuff
to go for. Nylon, although stronger, is much softer plus it is hygroscopic
and will absorb water.
50mm stiff polyprop webbing |
50mm soft polyprop webbing |

£1.80/m + UK P&P (£1
for the 1st metre then 10p per m)
They use this stuff for Police utility belts as it resists sideways collapse.
Ideal for main harness and much, much stiffer than the AP Valves stuff. Any colour
as long as it's black. |

£1.40/m + UK P&P (£1
for the 1st metre then 10p per m)
Identical to the stuff from AP Valves and ideal for crotch straps.
Any colour as long as it's black. |
|
|
|
|
|
|
|
|
|
|
|
Stainless bits and bobs
|
|
|
|
|
|
50mm 316 stainless D ring

£1.50 + UK P&P (£1)
It's stainless and it's a D ring |
|
|
|
50mm 316 bent D ring

£2.50 + UK P&P (£1)
Bent so that it naturally sticks out, making clipping things on an off
a doddle
|
100mm 316 double ender

£ 6.50 + UK P&P (£1.50)
Perfect for clipping things off at both ends. Every diver should carry one somewhere on them while diving
|
|
|
90mm 316 stainless bolt snap

£4.75 + UK P&P (£1)
For clipping stuff to your harness.
90mm long with a 20mm diameter eye.
|
120mm 316 stainless bolt snap

£5.95 + UK P&P (£1)
These are the Daddy for clipping on stages, pony bottles and heavier
stuff. 120mm long with a 32mm eye. Grrrr. |
|
|
|
|
|
50mm stainless steel toothed 3 bar retainer

£ 1.75 + UK P&P (£1)
Toothed to grip the webbing.
|
|
|
|
Stainless weight belt buckle

£ 4.95 + UK P&P (£1)
Reliable heavy duty buckle
|
M8 stainless wing nut

£1.95 + UK P&P (£0.50)
Stainless steel wingnut |
|
|
M8 stainless washer

£0.10 + UK P&P (£0.50)
Stainless steel washer
|
M8 stainless nut

£0.30 + UK P&P (£0.50)
Stainless steel nut
|
|
|
|
M8 stainless self-locking nut

£0.75 + UK P&P (£0.50)
Stainless steel nyloc nut- it's got a deformable plastic insert so it
won't come unscrewed |
|
|
|
|
|
M8 x 25 set screw

£1.50 + UK P&P (£1.50)
Stainless steel bolt. Threaded all the way up. I've got a selection in stock
so if the length isn't quite right for you, drop me an email and I'll sort
one
out
for you
|
|
|
|
|
|
Half-round 6" bastard cut file for deburring
£4.50 + UK P&P (£1)
Yes, they really are called that. Ideal for getting the sharp corners off your
brand new plate.
If you would prefer not to pay using Paypal and would like to use an alternative
form of payment please mail me Please
also email if you would like a non-standard option, have a multiple order of
more than 10 or would like overseas shipping.
And the stroppy bit at the bottom (sorry):
Buy buying these bits you agree that no warranty is implied or given- these
kits are supplied simply to save you the bother of finding the bits yourself
and are supplied for you to do with what you will. If you want a commercial
guarantee, please purchase your kit from your LDS. Please be careful when
using hand tools. Take care down there. |